CDL pump is used to transport clean water or liquid similar to clean water, and CDLF pump is used to transport slightly corrosive liquid. The impeller of the water pump is made of stainless steel plate by stamping and welding, and it is made of cemented carbide mechanical seal and cemented carbide guide bearing. The utility model has the advantages of small volume, light weight, high efficiency, energy saving, small vibration and noise, long service life, small floor area, beautiful appearance, etc.
Q=0.3-110m3/h. H=13-260m. T=0～120℃
It is required that there shall be no solid particles, fibers, strong corrosivity and explosion hazard in the liquid; if there is no special requirement for the power supply, the power supply shall be 3-phase, 380V, 50Hz, and the voltage fluctuation shall be within ± 5%; medium temperature: 0-105 ℃; when delivering hot water, the inlet pressure of the pump shall not be lower than that specified in the table below to avoid cavitation.
This series of pumps are widely used in boiler water supply, high-rise building water supply, hot water circulation, fire-fighting pressurization, hydraulic flushing, food, brewing, medicine, chemical industry, aquaculture, air conditioning cooling, medicine and chemical industry.