CH type standard chemical pump is a Horizontal single-stage single suction cantilever centrifugal pump. It is a high efficiency and high anti cavitation pump derived from the optimization and combination of Z series partial type spectrum on the basis of C series type spectrum according to the standard of type II of centrifugal pump (equivalent to iso5199:2002) GB / T 5656-2008.

The petrochemical process pump is designed and manufactured according to api61011th centrifugal pump for petroleum, petrochemical and natural gas industries. Support mode: oh1 \ oh2 two structures, impeller separated and closed. Ze pump is divided into three types: low pressure D, medium pressure Z and high pressure G.

According to the API610 11th standard design, the pump body is supported by the center line and the bottom NPSH is designed. The material of pump overflow parts is Zirconium 702 or zirconium 705, which has stronger corrosion resistance. The flushing and cooling scheme of mechanical seal shall be in accordance with api682 and iso21049 standards, and the mechanical seal shall be cartridge mechanical seal. The machine seal has long service life, can be maintained, and can save production cost. The temperature and vibration remote sensors are installed at the bearing, which can remotely monitor the operation of the pump.

According to API685 and ISO2858 standards, a single-stage non leakage special material magnetic pump is designed and developed.

It is a single-stage single suction cantilever horizontal centrifugal pump with center line support (oh2). The pump body and pump cover are equipped with insulation jacket. The pump cover is designed with pump cavity purging interface. The bearing chamber is designed with cooling system. It is commonly used for the transportation of molten urea and molten ammonium nitrate. It can be used for the transportation of other chemical media containing particles or easy to crystallize.

According to API610 standard, the horizontal multi-stage centrifugal pump with axial force self balance supported at both ends is developed. The impeller is arranged symmetrically, which can eliminate the axial force in theory. The pump end is equipped with angular contact ball bearing to bear the residual axial force, which completely solves the problem of axial force. There is no balance plate and balance ring in the pump, a pair of vulnerable parts are removed, the service life of the pump is improved, the friction loss of balance plate balance ring is eliminated, the volume loss of discharge pressure is eliminated, and the pump efficiency is improved.

LVP type corrosion-resistant liquid ring vacuum pump is used to pump or compress air and other corrosive gas without particles, so as to form vacuum or pressure in a closed container. The vacuum pump unit combines liquid ring vacuum pump, steam water separator, plate heat exchanger, control valve, liquid level indicator and connecting pipe to form a skid, which is convenient for users to install on site.

Tha axial-flow pump is a single-stage radial split type, which is designed reasonably and easy to disassemble. According to the different shell, it can be divided into two types: elbow type and volute type. According to different installation forms, it can be divided into horizontal installation and hanging installation. According to different connection methods, it can be divided into three types: direct connection, reducer connection and belt connection.

VSS series pumps are vertical, single-stage, single suction cantilever centrifugal Self-priming pumps; their size and performance meet DIN24256 / ISO2858 standard.

KY type long shaft submerged pump, VS4 structure, pump shaft system flexible shaft, the axial force of the pump is carried by the thrust bearing on the bearing body, the radial force is supported by the sliding bearing on the pump shaft, which mainly transports non particle media similar to water, and the depth of underwater insertion can be greater than 2m.

VS5, the pump shaft system is rigid, and there is no sliding bearing under the liquid, which completely solves the problem that the bearing of the pump under the liquid is easy to wear and tear. The force of the pump is borne by a group of centripetal thrust bearings and a group of centripetal bearings, forming a double support, and improving the service life of the bearing. It mainly transports medium containing particles and easy to crystallize, and the insertion depth is not more than 1.5m

KHG type pipeline pump, oh3 structure, has independent bearing chamber and lubricating mechanism, the force produced by the pump has its own bearing body, that is, the pump shaft and motor shaft are designed separately, and the coupling is used to transmit the torque. It is mainly used for industrial transportation of high temperature, high pressure, granular and corrosive media.

SP series single stage cantilever centrifugal pump with small flow and high lift is in accordance with the 11th edition of API610. Special measures have been taken in the hydraulic design of this series of pumps. The gentle decline of curve shape meets the requirements of process pressure regulation, without hump, and can be operated in the full flow range. It has the characteristics of high efficiency and energy saving, reliable and stable operation, high temperature and high pressure resistance, etc.

Emulsification pump is a kind of precise combination of rotating stator, which produces strong shear force in high-speed rotation to realize mixing, homogenization, dispersion and comminution. Installed on the pipeline, the material can be processed continuously to eliminate the quality difference between batches.

It is designed and manufactured according to API61011th centrifugal pump for petroleum, petrochemical and natural gas industries. It is mainly used to transport suspended medium containing solid particles or impurities. The pump material is wear-resistant or corrosion-resistant. Optimize the structure of the pump, improve the stability of the pump operation.

KSP series chemical mixed flow pump is a horizontal radial split cantilever type mixed flow pump, and the pump body is supported by feet. It is designed and manufactured in accordance with GB / t13008-2010 technical conditions for mixed flow pump and axial flow pump. The pump has stable hydraulic performance, high efficiency, safety and reliability, stable operation and convenient maintenance. According to different working conditions, the pump seal can adopt packing seal, single end face, double end face and other seals, which are suitable for different working conditions.